Hikvision Digital Technology DS-2CD6362F-I Manuel d'instructions télécharger pdf (Page 13)

Network Fisheye Camera·Quick Operation Guide

● Make sure that there is no reflective surface too close to the

camera lens. The IR light from the camera may reflect back into

the lens causing reflection.

● The foam ring around the lens must be seated flush against the

inner surface of the bubble to isolate the lens from the IR LEDS.

Fasten the dome cover to camera body so that the foam ring

and the dome cover are attached seamlessly.

2.1 Ceiling Mounting

Steps:

1. Drill three screw holes and the cable hole according to the

supplied drill template.

Drill Template Figure 2-1

2. Fix the three supplied screws half-deep to the ceiling, leaving

enough space to hook the camera body.

TOP

Drill Template

HoleA: for cables routed through the ceiling

Screw hole 1: for Mounting Base

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 30 31

Pas de commentaire

Hikvision Digital Technology DS-2CD6362F-I Manuel d'instructions Page 13